Updated: Sep 17, 2022
Hi everyone! I've revised my Crochet Lily Slouch (one of my earliest patterns) & will be offering it for free here on my blog! Of course, you can always purchase a copy of the pdf. This is an updated pattern so if you have already purchased it, contact me and I will send you the new pdf pattern. Unfortunately, most shops don't send updated copies except Ravelry.
This post contains affiliate links. Please see bottom of post for more information.
Visit my shops for the pdf and other Knit and Crochet patterns!
Don't forget to subscribe to my blog and follow me over on Instagram @Designsbyphanessa.
Scroll down for the Pattern & video, and visit my Youtube Channel. Please subscribe to my channel while you're there!
Thank you in advance for your support!
Lily Slouch Beanie A crochet pattern by Phanessa Fong
The full Video is available here (youtube.com/designsbyphanessa).
You may sell the finished items but please credit original designer and reference back to: Designs by Phanessa.
YARN | Worsted Weight
100-200 Yards (Adult)
HOOKS | Tulip Etimo
USH 5mm (Brim) | USJ 6mm (Body)
ch – Chain
st(s) – Stitch(es)
sl st – Slip Stitch
sc – Single Crochet
hdc – Half Double Crochet
dc – Double Crochet
tbl – Through Back Loop
beg – Beginning
rep – Repeat
rem – Remaining
sc2tog – Single Crochet 2 sts Together
SKILL LEVEL – Beginner
SPECIAL STITCH –
Double Crochet Cluster (dc cl) – [yo, insert hook in st, pull up a loop, yo, pull through 2] twice, yo, pull through 3 loops on hook.
GAUGE | In pattern
4” = 5.25 DC Cluster + SC Stitches | 5.25 Rounds
This is just a standard head sizing chart provided for your convenience. This is not the final size. Sizes may differ due to crocheter’s tension and type of yarn used.
INSTRUCTIONS | Video Tutorial
BRIM | Smaller hook size
Foundation: Ch 10 or as many ch sts as you want your brim size.
Note: Video for different brims! Adjust brim to accommodate the height of your beanie.
Row 1: 1sc into the 2nd ch from the hook and into each ch across. Ch1 and turn. (9 sts)
Row 2: 1sc tbl in the first st and every st across. Ch1 and turn. (9 sts)
Repeat row 2 until desired circumference ending on the same side as the beginning tail. Measure brim while slightly stretched. You want the brim snug but not over stretched. See chart on page 1 for standard circumference sizes.
Example: I worked 53 rows (23”) for a small adult.
Seaming the brim | Video Tutorial
Align the 2 short ends together. Work a sl st through the “chain” end of the brim and through the back loops of the other end of the brim. Flip brim right side out so the seam is on the inside.
BODY | Switch to larger hook size
Set up round 1 (Video): Ch1, work sc sts loosely in multiples of 2 sts around the brim. Join with a sl st to the 1st sc.
Notes: You should have 1 st per row. Increase number of sc sts to get a number in multiples of 2 sts.
If you used the hdc sts for the brim, you should have 3 sts for every 2 rows of brim. Watch the video here.
Rounds 1: ch1, [1sc, 1dc cl] in the same st, *sk1, [1sc, 1dc cl] in the next st. Rep from * around. Join with a sl st to the first sc st.
Note: Work the [1sc, 1dc cl] sts in the sc st & not the dc cl from the previous round.
Round 2: ch1 and turn your work, [1sc, 1dc cl] st into the same st1, *sk the dc cl, [1sc, 1dc cl] st in the next. Rep from * around, sl st to the first sc st.
Repeat round 2 until beanie measures approx. 2” above the ear to crown height measurement (see chart on page 1). Measure from the bottom of the brim. Adjust slouch by working less/more rounds keeping in mind the decrease is approx. 1.5”.
Round 1: ch1 and turn your work, [1sc, 1dc cl] st into the same st, *sk the dc cl, 1sc in the next sc st, 1dc cl in the next sc st, [1sc, 1dc cl] in the next sc st. Rep from * around. Join with a sl st to the first sc st.
Round 2: ch1 and turn your work, 1 sc in same sc st, *1dc cl in the next sc st, 1sc in the next sc st. Rep from * around ending with a dc cl. Join with sl st to the first sc st.
Round 3: ch1, *1sc in each of the next 4 sts, sc2tog. Rep from * around. Sc in any rem sts. Do not join. Work in a continuous round.
Round 4: *1sc in each of the next 3 sts, sc2tog. Rep from * around. Sc in any rem sts.
Round 5: *1sc in each of the next 2 sts, sc2tog. Rep from * around. Sc in any rem sts. Join with sl st to the first sc st.
Fasten off leaving a long tail. Weave the tail through the sts using your tapestry needle. Pull tail to close and tighten hole. Secure and weave in all ends.
Pom Pom (optional)
Yarn Pom | Video Tutorial
Faux Fur Pom | Video Tutorial
For Designs by Phanessa patterns, visit my shops.
You may sell products using my patterns, but please give credit and link back to original designer & the patterns. Do NOT use any of my photos or copy/distribute any of my patterns as your own. If you share my free patterns, please link back to original pattern page. Please leave a comment if there are errors to any of my patterns. Thank you!
© 2022 Designs by Phanessa, All rights reserved.
PRIVACY and DISCLOSURE:
Designs by Phanessa is a participant in multiple affiliate programs that provides an advertising commission if you purchase through these links. If you purchase something from the affiliate links, I will get a small commission with no extra cost to you. I DO NOT collect, store, use, or share any data about you.