Happy March! I have a fun pattern for ya'll today! We went camping recently and I found this yarn in our trailer and wanted to crochet something with it. As I was making it, I remembered starting a similar pattern years ago and scrapping it. It's the case of too many projects, not enough time.
I'm glad I finished this one. Mostly because I wanted to record a video with some new gear I bought. Similar to yarn making me happy, camera gear makes me happy too :) I'm upgrading my set-up and was excited to try some things. So bear with me while I test a few equipment out....
Watch the Tutorial or scroll down for the written pattern. The ad-free pdf pattern is also available in my shops. Your support helps me provide content and is greatly appreciated!
Purchase from Ravelry: Crochet Trelyss Slouch
Purchase from Etsy: Crochet Trelyss Slouch
Purchase from KnitCrate: Crochet Trelyss Slouch
Watch the video on YouTube: Crochet Trelyss Slouch Tutorial
Watch the LEFT Hand tutorial: Crochet Trelyss Slouch Tutorial (LEFT Hand)
This post contains affiliate links. Please see bottom of post for more information on privacy and disclosures.
YARN | Bulky Weight used but you can use any weight.
2 Skeins is 218 Yards (includes Yarn Pom Pom)
Note: Yardage will differ depending on yarn weight.
HOOKS | Knitter’s Pride Rose
US K/6.5mm (Brim) | US 8mm (Body)
OTHER MATERIALS
ABBREVIATIONS
ch – Chain
st(s) – Stitch(es)
sl st – Slip Stitch
yo – Yarn Over
sc – Single Crochet
hdc – Half Double Crochet
tbl – Through Back Loop
rep – Repeat beg – Beginning
sc2tog – Single Crochet 2 sts Together
SPECIAL STITCH
Front Post Treble Crochet (fptr): yo twice, insert hook around post of indicated st, [yo, pull through 2 loops] 3x.
SKILL LEVEL – Intermediate
NOTES – Pattern is written in US terms.
Any weight yarn can be used with recommended hook size for the body & 1-2 sizes smaller for the brim.
Instructions
BRIM | Smaller Size Hook
Foundation: Ch8 (or as tall as you want your brim)
Note: Try different brims!
Row 1: 1sc into the 2nd ch from the hook and into each ch across. Ch1 and turn (7 sts)
Row 2: 1sc tbl in the first st and every st across. Ch1 and turn (7 sts)
Repeat Row 2 until desired circumference ending on the same side as the beginning tail. Measure brim while slightly stretched. See chart above chart for standard circumference sizes.
Seaming the brim
With short ends together, sl st through the “chain” end of the brim and tbl of the other end of the brim. Flip brim inside out so the seam is on the inside.
BODY | Switch to larger size hook
Round 1: Ch1, 1sc around the brim in multiples of 6 sts. Sl st to the 1st sc.*
Note: You can choose to work in a continuous round without joining. Place a marker on first st to track the beg of the round. Round 1 in the rep is sc sts around. The repeat for Round 1-8 will just be sc sts around.
Round 2-3: ch1, 1sc in every st around. Join with a sl st in the first sc st.
Round 4: ch1, 1fptr around post 3 rounds below, 3 sts over, sk 1 st, *1sc in each of next 4 sts, 1fptr around post 3 rounds below (in the st right after the last fptr st), 1fptr around post 3 rounds below (with 4 sts between the last fptr), sk 2 sts. Rep from * around. End with 1fptr around post 3 rounds below (in the st right after the last fptr st). Join with a sl st in the first st.
Rounds 5-7: ch1, 1sc in every st around. Join with a sl st in the first sc st.
Round 8: ch1, *1sc in next 2 sts, 1fptr around post 3 rounds below, above the fptr from round 4. 1fptr around post 3 rounds below (with 4 sts between the last fptr), sk 2 sts, 1sc in each of next 2 sts. Rep from * around. Join with a sl st in the first st.
*Repeat Rounds 1-8 until beanie measures approx. 2-3” above the desired height measurement (see chart above). End after round 4 or 8. Adjust slouch by crochet less/more rounds. Please note that the Round 1 repeat is just working 1 single crochet in every stitch aorund.
Decrease Rounds | Worked in continuous round.
Round 1: *1sc in next st, sc2tog. Rep from * around.
Round 2: 1sc in every st around.
Round 3: *1sc in next st, sc2tog. Rep from * around.
Repeat Round 2 & 3 again if you feel your top is too wide to close.
FINISHING Fasten off leaving a long tail. Weave the tail through the sts using your tapestry needle. Pull tail to close and tighten hole. Secure and weave in all ends.
I found these affordable and pretty Faux Fur Pom Poms on Amazon that I used in my tutorial. It saves me so much time but if you want to make your own, I've provided links for 2 tutorials.
Pom Pom (optional)
Using an extra-large pom pom maker (or desired size), make pom pom by wrapping yarn around pom maker until full or as thick as you’d like and attach to beanie.
Yarn Pom | Video Tutorial
Faux Fur Pom | Video Tutorial
If you don't know the basics, you can definitely check out my YouTube Channel for beginner's How to Crochet Video Tutorials. Don't see what you need? Let me know and I'll add it to my list! There's so many videos out there, I know you will find the one that's right for you!
For Designs by Phanessa patterns, visit my shops from main menu.
You may sell products using my patterns, but please give credit and link back to original designer & the patterns. Do NOT use any of my photos or copy/distribute any of my patterns as your own. If you share my free patterns, please link back to original pattern page. Please leave a comment if there are errors to any of my patterns. Thank you!
© 2020 Designs by Phanessa, All rights reserved.
PRIVACY and DISCLOSURE:
Designs by Phanessa is a participant in multiple affiliate programs that provides an advertising commission if you purchase through these links. If you purchase something from the affiliate links, I will get a small commission with no extra cost to you. I DO NOT collect, store, use, or share any data about you.
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPS Machine EPS Block…
EPS Machine EPS Block…
EPS Machine EPS Block…
AEON MINING AEON MINING
AEON MINING AEON MINING
KSD Miner KSD Miner
KSD Miner KSD Miner
BCH Miner BCH Miner
BCH Miner BCH Miner
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPTU Machine ETPU Moulding…
EPS Machine EPS Block…
EPS Machine EPS Block…
EPS Machine EPS Block…
AEON MINING AEON MINING
AEON MINING AEON MINING
KSD Miner KSD Miner
KSD Miner KSD Miner
BCH Miner BCH Miner
BCH Miner BCH Miner